Info: 'This application cannot run as it requires:A Power Mac™ computer,QuickDraw™ 3D vsn. 1.0.2 or later,Macintosh® Drag & Dropand at least 16 Mb of memory.'
DITL_32764.txt
Items: (2 entries)
0:
Bounds: x1=290, y1=118, x2=348, y2=138
Type: 4
Info: 'Quit'
1:
Bounds: x1=69, y1=9, x2=351, y2=112
Type: -120
Info: 'Interiors cannot run as the shared library ‘Interiors™ Shared Lib’ cannot be found in the same folder as the ‘Interiors™’ application.Please reinstall Interiors™.'
DITL_32763.txt
Items: (3 entries)
0:
Bounds: x1=304, y1=181, x2=362, y2=201
Type: 4
Info: 'Quit'
1:
Bounds: x1=69, y1=15, x2=359, y2=83
Type: -120
Info: 'Interiors can not run because the QuickDraw 3D Viewer is not installed, or you are running a version of QuickDraw 3D prior to version 1.0.2.'
2:
Bounds: x1=68, y1=91, x2=367, y2=171
Type: -120
Info: 'Make sure that you have installed QuickDraw 3D 1.0.2 or later and make sure that the QuickDraw 3D Viewer shared library is in your Extensions folder in the System Folder.'
DITL_32762.txt
Items: (3 entries)
0:
Bounds: x1=304, y1=258, x2=362, y2=278
Type: 4
Info: 'Quit'
1:
Bounds: x1=69, y1=15, x2=359, y2=83
Type: -120
Info: 'Interiors could not initialize because of an internal problem.Possible solutions:-'
2:
Bounds: x1=68, y1=88, x2=365, y2=252
Type: -120
Info: 'Set the memory partition for Interiors to 500K more than the recommended size.Or while launching Interiors:-Hold the shift key down to stop the plug-ins from loading.Hold the command and option keys down to reset the preferences.'
DITL_32761.txt
Items: (2 entries)
0:
Bounds: x1=238, y1=82, x2=296, y2=102
Type: 4
Info: 'Quit'
1:
Bounds: x1=69, y1=15, x2=304, y2=68
Type: -120
Info: 'Interiors can not run as it requires Macintosh® Drag & Drop (included in System 7.5 or later).'
DITL_32760.txt
Items: (2 entries)
0:
Bounds: x1=237, y1=69, x2=295, y2=89
Type: 4
Info: 'Quit'
1:
Bounds: x1=68, y1=9, x2=290, y2=58
Type: -120
Info: 'Interiors can not run as it requires QuickDraw 3D vsn. 1.0.6 or later.'
DITL_20001.txt
Items: (8 entries)
0:
Bounds: x1=340, y1=187, x2=446, y2=207
Type: 4
Info: 'Register Now'
1:
Bounds: x1=212, y1=187, x2=324, y2=207
Type: 4
Info: 'Register Later'
2:
Bounds: x1=13, y1=187, x2=176, y2=207
Type: 4
Info: 'Enter Serial Number…'
3:
Bounds: x1=64, y1=9, x2=269, y2=25
Type: -120
Info: 'Registering your software'
4:
Bounds: x1=64, y1=38, x2=450, y2=62
Type: -120
Info: 'When you register your software, Microspot will be able to inform you of any updates to this software.'
5:
Bounds: x1=64, y1=72, x2=450, y2=96
Type: -120
Info: 'Please click on the ‘Register Now’ button to launch the registration application. This will help you to fill out your registration details.'
6:
Bounds: x1=64, y1=107, x2=450, y2=131
Type: -120
Info: 'Microspot will then supply you with a new, personal serial number. This message will not appear once you have entered this serial number.'
7:
Bounds: x1=63, y1=144, x2=449, y2=168
Type: -120
Info: 'If you have already sent your registration details to Microspot, but are waiting for a reply, please click ‘Register Later’.'
DITL_20000.txt
Items: (14 entries)
0:
Bounds: x1=220, y1=300, x2=288, y2=320
Type: 4
Info: 'OK'
1:
Bounds: x1=140, y1=300, x2=204, y2=320
Type: 4
Info: 'Demo'
2:
Bounds: x1=3, y1=50, x2=304, y2=66
Type: -120
Info: 'Please enter your Serial Number:'
3:
Bounds: x1=0, y1=67, x2=305, y2=69
Type: -128
Info: ''
4:
Bounds: x1=11, y1=81, x2=281, y2=98
Type: -120
Info: 'Name:'
5:
Bounds: x1=19, y1=101, x2=279, y2=117
Type: 16
Info: ''
6:
Bounds: x1=11, y1=124, x2=288, y2=140
Type: -120
Info: 'Organization (optional):'
7:
Bounds: x1=19, y1=143, x2=279, y2=159
Type: 16
Info: ''
8:
Bounds: x1=11, y1=166, x2=284, y2=182
Type: -120
Info: 'Serial number (XXXX-V000-0000-0000-0000-0000):'
9:
Bounds: x1=19, y1=185, x2=279, y2=201
Type: 16
Info: ''
10:
Bounds: x1=11, y1=210, x2=293, y2=226
Type: -120
Info: 'When you have entered your serial number, click ‘^0’.'
11:
Bounds: x1=11, y1=225, x2=307, y2=253
Type: -120
Info: 'If you do not have a serial number, or do not have it available, click ‘^1’.'
12:
Bounds: x1=11, y1=252, x2=307, y2=296
Type: -120
Info: 'If you click ‘^1’, this software may not run, or may run in a demonstration mode. Check with the software manual for more information.'
13:
Bounds: x1=0, y1=0, x2=142, y2=46
Type: 64
Info: 'N '
DITL_7007.txt
Items: (5 entries)
0:
Bounds: x1=400, y1=180, x2=464, y2=200
Type: 4
Info: 'OK'
1:
Bounds: x1=244, y1=180, x2=364, y2=200
Type: 4
Info: 'Register Now…'
2:
Bounds: x1=74, y1=7, x2=486, y2=52
Type: -120
Info: 'This is an unregistered version of Interiors. This alert will appear each time you launch Interiors until you purchase a full serial number.For information please contact:'
3:
Bounds: x1=73, y1=51, x2=290, y2=175
Type: -120
Info: 'Microspot USA Inc.1756 Costa del Sol,Boca Raton, FL 33432. USA.Phone: 1-800-622-7568Phone: 1-561-395-9996Fax: 1-561-395-9972Internet: sales@microspot.comSupport: support@microspot.comWeb Page: www.microspot.com'
Info: 'This is a demo version of Interiors. Saving, printing and data export are disabled until you purchase a full copy or serial number.For information please contact:'
3:
Bounds: x1=542, y1=142, x2=925, y2=160
Type: -120
Info: 'Please call for the current special low cost pricing.'
4:
Bounds: x1=541, y1=218, x2=942, y2=262
Type: -120
Info: 'Clicking the 'Register Now' button will take you through three short steps to obtain a key code which will unlock all of the features of Interiors and remove the demo dialogs.'
5:
Bounds: x1=541, y1=169, x2=927, y2=187
Type: -120
Info: 'Alternatively you can register immediately using a key code.'
6:
Bounds: x1=73, y1=51, x2=290, y2=179
Type: -120
Info: 'Microspot USA Inc.1756 Costa del Sol,Boca Raton, FL 33432. USA.Phone: 1-800-622-7568Phone: 1-561-395-9996Fax: 1-561-395-9972Internet: sales@microspot.comSupport: support@microspot.comWeb Page: www.microspot.com'
Info: 'You will not be able to register Interiors, as you appear to be running the demo application from a CD or locked disk.'
2:
Bounds: x1=74, y1=71, x2=371, y2=139
Type: -120
Info: 'If you wish to register, copy the Interiors application and its associated files to your hard disk, and then launch the application from there.'
DITL_7004.txt
Items: (3 entries)
0:
Bounds: x1=263, y1=79, x2=348, y2=99
Type: 4
Info: 'Register'
1:
Bounds: x1=193, y1=79, x2=251, y2=99
Type: 4
Info: 'Quit'
2:
Bounds: x1=85, y1=12, x2=348, y2=70
Type: -120
Info: 'Your demo time is up. If you wish to continue you can register this copy by pressing the Register button.'
DITL_7003.txt
Items: (11 entries)
0:
Bounds: x1=301, y1=302, x2=384, y2=322
Type: 4
Info: 'Register'
1:
Bounds: x1=231, y1=302, x2=289, y2=322
Type: 4
Info: 'Cancel'
2:
Bounds: x1=151, y1=251, x2=386, y2=267
Type: -120
Info: ''
3:
Bounds: x1=14, y1=251, x2=135, y2=268
Type: -120
Info: 'Registration Number:'
4:
Bounds: x1=148, y1=275, x2=379, y2=291
Type: 16
Info: ''
5:
Bounds: x1=76, y1=275, x2=137, y2=291
Type: -120
Info: 'Key Code:'
6:
Bounds: x1=10, y1=84, x2=225, y2=218
Type: -120
Info: 'Microspot USA Inc.1756, Costa del Sol,Boca Raton, FL 33432. USA.Phone: 1-800-622-7568Phone: 1-561-395-9996Fax: 1-561-395-9972Internet: sales@microspot.comSupport: support@microspot.comWeb Page: www.microspot.com'
Info: 'The final step is to telephone Microspot with your credit card details and quote the registration number given below. In exchange you will be given a key code which you should enter below the registration number.'
10:
Bounds: x1=77, y1=218, x2=334, y2=250
Type: -120
Info: 'The following registration number will not be valid if you cancel this dialog.'
DITL_7002.txt
Items: (10 entries)
0:
Bounds: x1=225, y1=187, x2=283, y2=207
Type: 4
Info: 'OK'
1:
Bounds: x1=155, y1=188, x2=213, y2=208
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=281, y2=29
Type: -120
Info: 'Registration Process Step 1 of 3'
3:
Bounds: x1=19, y1=53, x2=65, y2=69
Type: -120
Info: 'Name:'
4:
Bounds: x1=70, y1=54, x2=280, y2=68
Type: 16
Info: ''
5:
Bounds: x1=0, y1=74, x2=63, y2=91
Type: -120
Info: 'Company:'
6:
Bounds: x1=70, y1=75, x2=280, y2=89
Type: 16
Info: ''
7:
Bounds: x1=3, y1=96, x2=63, y2=114
Type: -120
Info: 'Address:'
8:
Bounds: x1=70, y1=96, x2=280, y2=170
Type: 16
Info: ''
9:
Bounds: x1=10, y1=32, x2=286, y2=50
Type: -120
Info: 'Please enter the following information:'
DITL_7001.txt
Items: (2 entries)
0:
Bounds: x1=343, y1=121, x2=418, y2=141
Type: 4
Info: 'Enjoy'
1:
Bounds: x1=74, y1=7, x2=419, y2=113
Type: -120
Info: 'Your key code was accepted.Interiors will now run as a fully working version.You will no longer see any more demo dialogs and all the features will be enabled.Thank you for buying Interiors.'
DITL_7000.txt
Items: (2 entries)
0:
Bounds: x1=298, y1=91, x2=356, y2=111
Type: 4
Info: 'OK'
1:
Bounds: x1=74, y1=7, x2=370, y2=78
Type: -120
Info: 'Your key code was NOT accepted.Interiors will still run as a Demo version.If you feel that this dialog was in error please contact Microspot.'
DITL_318.txt
Items: (5 entries)
0:
Bounds: x1=332, y1=172, x2=408, y2=192
Type: 4
Info: 'Save'
1:
Bounds: x1=233, y1=172, x2=320, y2=192
Type: 4
Info: 'Don’t Save'
2:
Bounds: x1=64, y1=16, x2=409, y2=68
Type: -120
Info: 'You have loaded a demo plug-in in your full version of Interiors. Interiors will run in demo mode while you have this plug-in loaded.'
3:
Bounds: x1=64, y1=70, x2=410, y2=106
Type: -120
Info: 'The demo plug-ins are in italic in the About Plug-ins menu in the Apple menu.'
4:
Bounds: x1=64, y1=108, x2=412, y2=162
Type: -120
Info: 'Your open documents will be saved immediately after this alert but after that you will not be able to save again while demo plug-ins are loaded.'
DITL_317.txt
Items: (3 entries)
0:
Bounds: x1=335, y1=207, x2=403, y2=227
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=404, y2=105
Type: -120
Info: 'Serial number ^0 is already in use by “^1” in zone “^2”.You will run in demo mode until you quit so you will not be able to print or save.'
2:
Bounds: x1=63, y1=107, x2=405, y2=195
Type: -120
Info: 'To stop this alert a unique, valid serial number needs to be entered or there must be no serial number clashing on launching. To enter a new serial number, hold down the control key when you launch the application.'
DITL_316.txt
Items: (3 entries)
0:
Bounds: x1=286, y1=65, x2=354, y2=85
Type: 4
Info: 'Delete'
1:
Bounds: x1=206, y1=65, x2=270, y2=85
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=16, x2=373, y2=51
Type: -120
Info: 'Are you sure you want to delete this view?'
DITL_315.txt
Items: (4 entries)
0:
Bounds: x1=354, y1=160, x2=422, y2=180
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=8, x2=424, y2=26
Type: -120
Info: 'You have allocated too much memory to Interiors.'
2:
Bounds: x1=64, y1=36, x2=420, y2=109
Type: -120
Info: 'QuickDraw 3D only uses temporary memory, so by increasing Interiors’s memory partition too much you have actually reduced the amount of RAM QuickDraw 3D can use.'
3:
Bounds: x1=64, y1=116, x2=414, y2=151
Type: -120
Info: 'Please reduce the amount or RAM allocated to Interiors to no more than 8Mb.'
DITL_314.txt
Items: (4 entries)
0:
Bounds: x1=334, y1=154, x2=402, y2=174
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=8, x2=404, y2=28
Type: -120
Info: 'The Interiors Online Manual could not be found.'
2:
Bounds: x1=64, y1=36, x2=414, y2=105
Type: -120
Info: 'The Interiors Online Manual should be in the same folder as the Interiors application and should be called “^0”.'
3:
Bounds: x1=64, y1=107, x2=378, y2=142
Type: -120
Info: 'Use the Interiors installer to re-install the manual if it is not on your disk.'
DITL_313.txt
Items: (5 entries)
0:
Bounds: x1=293, y1=186, x2=361, y2=206
Type: 4
Info: 'Continue'
1:
Bounds: x1=220, y1=186, x2=284, y2=206
Type: 4
Info: 'Quit'
2:
Bounds: x1=64, y1=8, x2=334, y2=59
Type: -120
Info: 'You are running QuickDraw 3D 1.5. This version has some severe performance problems.'
3:
Bounds: x1=64, y1=69, x2=336, y2=165
Type: -120
Info: 'We recommend that you either upgrade to version 1.5.1 or later, or downgrade to version 1.0.6Do you want to continue with this version of QuickDraw 3D?'
4:
Bounds: x1=11, y1=186, x2=212, y2=206
Type: 4
Info: 'Yes, and don’t tell me again'
DITL_312.txt
Items: (4 entries)
0:
Bounds: x1=259, y1=126, x2=327, y2=146
Type: 4
Info: 'OK'
1:
Bounds: x1=173, y1=125, x2=237, y2=145
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=16, x2=321, y2=86
Type: -120
Info: 'This file was saved with a newer version of QuickDraw 3D. It may contain objects that this version of QuickDraw 3D does not understand.'
3:
Bounds: x1=64, y1=89, x2=330, y2=114
Type: -120
Info: 'Do you want to continue with this file?'
DITL_311.txt
Items: (4 entries)
0:
Bounds: x1=240, y1=205, x2=308, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=154, y1=204, x2=218, y2=224
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=16, x2=311, y2=86
Type: -120
Info: 'One or more objects you are ungrouping were not created in Interiors and have unknown objects and information within them.'
3:
Bounds: x1=64, y1=89, x2=305, y2=186
Type: -120
Info: 'If you ungroup these items you may find that they render differently and lose their size and rotation.Do you want to continue to ungroup these objects? This is undoable.'
DITL_310.txt
Items: (2 entries)
0:
Bounds: x1=261, y1=71, x2=329, y2=91
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=319, y2=59
Type: -120
Info: 'This text file is not a QuickDraw 3D text file. Interiors can not open it.'
DITL_309.txt
Items: (2 entries)
0:
Bounds: x1=249, y1=154, x2=317, y2=174
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=324, y2=147
Type: -120
Info: 'The Interiors plug-in “^0” could not be opened because of an error ID ^1.To activate its capabilities, put the file into the “Plug-Ins” folder in the same folder as Interiors or Drag it into the tool palette.'
DITL_308.txt
Items: (2 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=359, y2=67
Type: -120
Info: 'Failed to undo, probably because insufficient temporary memory available.'
DITL_307.txt
Items: (4 entries)
0:
Bounds: x1=212, y1=117, x2=276, y2=137
Type: 4
Info: 'Stop'
1:
Bounds: x1=292, y1=117, x2=360, y2=137
Type: 4
Info: 'Continue'
2:
Bounds: x1=64, y1=16, x2=360, y2=67
Type: -120
Info: '^0 ^1 and may not be ^3 at this time.'
3:
Bounds: x1=64, y1=71, x2=360, y2=105
Type: -120
Info: 'Do you want the other items to be ^3?'
DITL_306.txt
Items: (3 entries)
0:
Bounds: x1=292, y1=97, x2=360, y2=117
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=360, y2=50
Type: -120
Info: '^0 ^1.'
2:
Bounds: x1=64, y1=54, x2=360, y2=88
Type: -120
Info: '^2 may not be ^3 at this time.'
DITL_305.txt
Items: (2 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=359, y2=67
Type: -120
Info: 'You can not apply a texture to this object as it has no texture capabilities.'
DITL_304.txt
Items: (2 entries)
0:
Bounds: x1=292, y1=105, x2=360, y2=125
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=365, y2=99
Type: -120
Info: 'Interiors can not run your Internet Browser. If you have an Internet Browser run it and enter the following address:http://www.microspot.co.uk/'
DITL_303.txt
Items: (2 entries)
0:
Bounds: x1=297, y1=96, x2=365, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=10, x2=368, y2=88
Type: -120
Info: '^0'
DITL_302.txt
Items: (4 entries)
0:
Bounds: x1=224, y1=153, x2=369, y2=173
Type: 4
Info: 'Continue at risk'
1:
Bounds: x1=64, y1=153, x2=128, y2=173
Type: 4
Info: 'Quit'
2:
Bounds: x1=64, y1=9, x2=357, y2=60
Type: -120
Info: 'You might have problems with Interiors as there is little free system memory left for QuickDraw 3D.'
3:
Bounds: x1=64, y1=69, x2=372, y2=139
Type: -120
Info: 'Try quitting some other applications, reduce the size of the Interiors windows, reduce Interiors’s memory partition, or turn on virtual memory to allow more system memory.'
DITL_301.txt
Items: (3 entries)
0:
Bounds: x1=292, y1=76, x2=360, y2=96
Type: 4
Info: 'Yes'
1:
Bounds: x1=212, y1=76, x2=276, y2=96
Type: 4
Info: 'Cancel'
2:
Bounds: x1=64, y1=16, x2=357, y2=66
Type: -120
Info: 'The name “^0” already exists. Do you want to replace it?'
DITL_300.txt
Items: (2 entries)
0:
Bounds: x1=275, y1=77, x2=343, y2=97
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=16, x2=348, y2=71
Type: -120
Info: 'You can not use “^0” as it is a reserved name.Please use another name.'
Info: 'Memory is getting full. Please try to alleviate the problem by closing or reducing the size of some windows.'
2:
Bounds: x1=75, y1=68, x2=348, y2=116
Type: -120
Info: 'If the problem persists, increase the memory partition allocated to Interiors.'
DITL_203.txt
Items: (3 entries)
0:
Bounds: x1=230, y1=55, x2=290, y2=75
Type: 4
Info: 'Revert'
1:
Bounds: x1=157, y1=55, x2=217, y2=75
Type: 4
Info: 'Cancel'
2:
Bounds: x1=75, y1=10, x2=290, y2=42
Type: -120
Info: 'Revert to the last saved version of “^0”?'
DITL_202.txt
Items: (4 entries)
0:
Bounds: x1=288, y1=71, x2=348, y2=91
Type: 4
Info: 'Save'
1:
Bounds: x1=215, y1=71, x2=275, y2=91
Type: 4
Info: 'Cancel'
2:
Bounds: x1=75, y1=71, x2=159, y2=91
Type: 4
Info: 'Don’t Save'
3:
Bounds: x1=75, y1=10, x2=348, y2=58
Type: -120
Info: 'Save changes to the ^0 document “^1” before quitting?'
DITL_201.txt
Items: (4 entries)
0:
Bounds: x1=288, y1=71, x2=348, y2=91
Type: 4
Info: 'Save'
1:
Bounds: x1=215, y1=71, x2=275, y2=91
Type: 4
Info: 'Cancel'
2:
Bounds: x1=75, y1=71, x2=159, y2=91
Type: 4
Info: 'Don’t Save'
3:
Bounds: x1=75, y1=10, x2=348, y2=58
Type: -120
Info: 'Save changes to the ^0 document “^1” before closing?'
DITL_138.txt
Items: (4 entries)
0:
Bounds: x1=333, y1=84, x2=401, y2=104
Type: 4
Info: 'OK'
1:
Bounds: x1=83, y1=82, x2=232, y2=102
Type: 4
Info: 'Run in Demo mode'
2:
Bounds: x1=20, y1=15, x2=52, y2=47
Type: -96
Info: ' '
3:
Bounds: x1=64, y1=16, x2=274, y2=69
Type: -120
Info: 'Please insert the Interiors™ CD or click the run in demo mode button.'
DITL_137.txt
Items: (0 entries)
DITL_134.txt
Items: (10 entries)
0:
Bounds: x1=331, y1=163, x2=407, y2=183
Type: 4
Info: 'Cancel'
1:
Bounds: x1=243, y1=163, x2=317, y2=183
Type: 4
Info: 'Continue'
2:
Bounds: x1=17, y1=163, x2=235, y2=183
Type: 4
Info: 'Keep Selected, but no Widgets'
3:
Bounds: x1=64, y1=16, x2=409, y2=84
Type: -120
Info: 'Selecting all these objects (^0) will create ^1 extra triangles due to the selection widgets. This may take a very long time and may even crash due to lack of RAM.'
4:
Bounds: x1=64, y1=89, x2=409, y2=126
Type: -120
Info: 'Do you want to continue, or keep the objects selected but not draw the widgets?'
5:
Bounds: x1=18, y1=18, x2=50, y2=50
Type: -96
Info: ' '
6:
Bounds: x1=65, y1=135, x2=298, y2=151
Type: -120
Info: 'Tell me again when selecting over'
7:
Bounds: x1=305, y1=135, x2=342, y2=151
Type: 16
Info: ''
8:
Bounds: x1=351, y1=135, x2=410, y2=151
Type: -120
Info: 'objects'
9:
Bounds: x1=452, y1=119, x2=656, y2=135
Type: 5
Info: 'Don’t show this alert again'
DITL_133.txt
Items: (10 entries)
0:
Bounds: x1=331, y1=182, x2=407, y2=202
Type: 4
Info: 'Deselect'
1:
Bounds: x1=243, y1=182, x2=317, y2=202
Type: 4
Info: 'Continue'
2:
Bounds: x1=17, y1=182, x2=235, y2=202
Type: 4
Info: 'Keep Selected, but no Widgets'
3:
Bounds: x1=64, y1=16, x2=409, y2=92
Type: -120
Info: 'Doing this action has created ^0 selected objects. This will create ^1 extra triangles to be rendered which may take a very long time and may even crash due to lack of RAM.'
4:
Bounds: x1=64, y1=93, x2=409, y2=145
Type: -120
Info: 'Do you want to continue, or deselect the objects so no widgets are drawn, or keep the objects selected but not draw the widgets?'
.dmg/Serious Software/Microspot Interiors demo/Interiors™ Demo/Interiors™ Demo.rsrc/dctb_7003.png){kind=link}